Air Conditioning Installation Tips

It is recommended that the outdoor unit of the split AC has at least 10 - 15 cm of open space around its top and sides. This is needed for proper airflow. Inhibiting air flow could make it harder to expel heat. This will drive your air conditioner operating costs up.

The general rule of thumb is to have at least one foot (or 12 inches) of clearance on each side of your air conditioner for service and repairs. Your air conditioner's manufacturer may have specific clearance recommendations, but they'll generally recommend between 12 and 24 inches. 

Building A Deck Over An Air Conditioner


Most AC manufacturers recommend maintaining a minimum 60" uninterrupted clearance above the compressor to allow for hot air to exhaust from the top of the unit. Without proper airflow, your AC unit can overheat and break down.

Here are a few tips to remember when you're installing a unit:

First, make sure the area is clean and level. It's especially important to remove debris before placing the unit. Depending on its size, you'll need to level the ground before placing the unit. Next, make sure to cut the power before wiring it. You should also be aware of where your fuse box is and know where the breaker box is. Finally, make sure that you keep your pets out of the work area. If you're working alone, you'll need to keep your children and pets safe, as they could get injured.

Once you have decided on the best location, you can begin the process of installing your air conditioning unit. The first step is to measure the room's square footage. This can be done by measuring the length and width of the room. Then, multiply these figures together to get the area's square footage. For example, a room that's 11 feet long and 12 feet wide is approximately 132 square foot. After you have the measurement, you can select a power that's right for the area.

The second step is to hire a professional, like Eagle Air to install your air conditioning unit. While it can be a huge investment, installing your own air conditioning unit can make it easier on the wallet. The right professional can do the work quickly and efficiently, and it's an excellent way to improve the air quality inside your home. There are a few other steps you need to take to ensure your new system is installed correctly. And remember, these tips are applicable to both window units and central air systems.

Before placing the air conditioning unit, make sure the area is clean and free of debris. If the unit is placed on the floor, it should be level. You should also make sure that the unit sits properly and does not tip over. In addition, it's important to cut the power before you begin the wiring. You should know where the fuse or breaker box is located. You should also keep your pets out of the area where the installation is taking place. Having an installer do it will ensure that the job goes smoothly.

When choosing a contractor for your air conditioning installation, you'll want to make sure the company uses its own employees. This will ensure that the technician is trained to do the job properly. Whether you're hiring a professional or a do-it-yourselfer, the installers' knowledge will be crucial to the efficiency of the system. If you're not comfortable doing it yourself, hire a professional. Having an air conditioning installation expert do the work is an excellent way to ensure that you have a high-quality unit installed.